In the POW cryptocurrency mining industry, hash calculation is possible using several technological solutions: central processors, video cards, ASIC and FPGA. And this time we will talk about the company Ubimust and its FPGA miner Ubimind ProLine 4. The number four in the name is not random, because 4 of the latest FPGA Xilinx Alveo U200 - 64 GB were used as a basis. And according to the assurances of the developers, each such FPGA is capable of delivering 2100MH/s on the Ethash algorithm (Dagger-Hashimoto) or 8400MH/s from the entire device from 4 FPGAs with an energy consumption of 800W.
Such a hashrate look too optimistic especially from a little-known company and at first glance it looks like a hoax. But let’s try to figure it out and start with the technical characteristics of Ubimind ProLine 4:
4 x Xilinx Alveo U200 – 64 GB
PSU Rosewill Hercules 1600s
96GB ECC LR-DIMM DDR4 2133Mhz (on the Motherboard)
SSD 1Tb M.2 2280
Asus Z10PE-D16 WS motherboard
Dual Intel Xeon E5-26XX multicore
Designed Optimize RackMount Mining Case
3 Magnetic Levitation RGB & 4 Rear High Speed
The cost of the entire FPGA miner Ubimind ProLine 4 today is equal to 37.871 USD, which under the current mining conditions Ethereum will pay off for at least a year.
In addition to the Ethash algorithm for FPGA, other algorithms are also available for which you only need to reprogram the FPGA chip itself.
Keccak (Smartcash, Maxcoin): 17GH/s per card.
Tribus (Denarius, Virtus): 2.1GH/s per card.
Phi1612 (Folm,Seraph): 650MH/s per card.
Skunhash (Multiple Coins): 1.3GH/s per card.
-Mining Os Links-
-Cudo Miner Link
-Want A Mining Rig Built-