Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin)

Zealot/Enemy (z-enemy) NVIDIA GPU miner.
kawpow, x16rv2, x16r, x16s, Bitcore, Phi1612, Xevan ,Tribus , x17, c11, AeriumX, XDNA(hex), phi, phi2, skunk etc …

Z-ENEMY 2.6.2 From: Dk & Enemy (z-enemy) NEW


  • Fixed compatibility with Nicehash , Miningpoolhub and some other pools (“epoch initialization failed” error).
  • Fixed crash while trying to load json config files in Ubuntu 16 based distributions (HiveOS 4)
  • Temporarily disabled environment variables in json config files in Ubuntu 16 based distributions (HiveOS 4)

MEGA : mega.nz/folder/cbAmRQCI#ZzRpmlx7tF4KGIRcT7AWiw

Z-ENEMY 2.6.1 From: Dk & Enemy (z-enemy)


  • Fixed broken non-kawpow algos in version 2.6

Version 2.6

Kawpow (RavenCoin):

  • Faster initialization on multi-gpu rigs
  • Performance improvements (few percent)
  • Smoother gpu/power load
  • Default intensity value increased from 20 to 21 for gtx 1070/1080 series


  • GPU reports are now grouped together
  • Average hashrate is no longer displayed incorrectly low when the miner starts up.
  • Added average shares/min reports
  • You can now use environment variables in your config files (%ADDR% and so on)
  • Default pause time between reconnection attempts is now 10 seconds

Z-ENEMY 2.5 From: Dk & Enemy (z-enemy)


  • Added kawpow algo (Upcoming Ravencoin hardfork 6th May)

First time or troubleshooting kawpow:

  • First time users - all ver. 2.02+ works on Cuda 9.x &Cuda 10.x and it is recommended to make sure you’ve updated your NVIDIA drivers.
  • Next important thing is intensity. We recommend intensity -19 or 20,(21 for 20x0) at first.
  • kawpow algo using +mem , but use no OC at first until you verify stability…

Z-ENEMY 2.4 From: Dk & Enemy (z-enemy)

- Fixed high CPU load with latest nVidia drivers, you can expect higher hashrate on the mining rigs with lower end CPUs

  • Fixed nvml.dll load error with latest nVidia driver s

Z-ENEMY 2.3 From: Dk & Enemy (z-enemy)


  • Performance improvement: +2-3% x16rv2 algo

Z-ENEMY 2.2 From: Dk & Enemy (z-enemy)


  • Added x16rv2 algo (Upcoming Ravencoin hardfork 1st Oct.)
  • Added support for secure stratum+ssl connections. New --no-cert-verify key.
    (Disable certificate errors check for ssl connections)
  • Fixed GPU data error in json api (/hwinfo)
  • Fixed phi2 bug on Cuda 10.1


IMPORTANT : Ravencoin is switching to the new x16rv2 algorithm on October 1st. There will be a new version of our miner z-enemy-2.2 with x16rv2 released in advance before the hard fork date .


Z-ENEMY 2.1 From: Dk & Enemy (z-enemy)

This version includes a new way to manage and monitor the miner.


  • Performance improvements: +4-5% most algos (x16r, x16s, x17, hex, bitcore, bcd…)
  • Stability improvements

Z-ENEMY 2.00 From: Dk & Enemy (z-enemy)

This version includes a new way to manage and monitor the miner.


New features:

  • Added new HTTP JSON API (see json_api_help.txt for the details), available at port 4067 by default
  • Added web control panel with real-time monitoring and charts.
    The UI is responsive and should be looking well on most mobile phones and tablets.

Other changes:

  • The miner informs about API servers (both Telnet and HTTP) being started
  • You can now disable both servers with --api-bind=0 and --api-bind-http=0 respectively
  • Minor bugfixes and stability improvements


  • For HTTP server --api-allow command line option isn’t having any effect (for now?)

Z-ENEMY 1.28 From: Dk & Enemy (z-enemy)

Performance improvements of 1.28 compared to previous version (1.27):

  • Bitcoin Diamond +7-8%, Hex 4-5% and +3-5% for x16r/s, x17, bitcore, c11, sonoa, etc…

Other changes:

  • Added --no-nvml switch to disable NVML monitoring (useful to reduce load on low end CPUs)
  • After several tests we recommend using intensity 22 on 1080ti cards on x16r algo (and perhaps others)

Z-ENEMY 1.27 From: Dk & Enemy (z-enemy)

Performance improvements:
Up to +3-4% for x16r/s and hex, +6-8% Bitcoin Diamond, 1-3% on others (x17, bitcore, c11, sonoa, etc…) on GTX 10x0 cards

Z-ENEMY 1.26 ver.1 From: Dk & Enemy (z-enemy)

Performance improvements:
- Up to +5-7% x16r/s, +7% bitcore, few percent on others (x17, c11, aergo …) on GTX 10x0 cards.

  • Hex algo +10% for GTX 10x0 cards and +2% for RTX 20x0 cards.

Other changes:

  • Removed renesis algo
  • Improved stability

💰 YEN · YouTube ·️ YEN.CAMP 🧠